Plusmark Get Plusmark
Work and events

Counting stock by hand: a simple clicker routine

Shelf by shelf, item by item, with a clicker in your hand. Here's a routine for counting stock that stays accurate: when to do a full count, how to handle cases and loose units, and how to double-check.

Two people with a clipboard walking down a warehouse aisle
Photo: Centre for Ageing Better on Unsplash

The simplest way to count stock by hand is to work one small area at a time, count one item at a time, and keep a separate tally for each item so nothing gets mixed up. Count full cases with a step the size of the case and loose units one by one, and recount anything that doesn't match your records before you change them.

A clicker in your hand makes it faster and quieter than muttering numbers under your breath. Here's a routine that works for a corner shop, a café's back room, a club's kit store or a small warehouse.

The short version

  • Decide the scope: a full count of everything, or a cycle count of a few items today.
  • One counter per item, or per item per location if it's stored in more than one place.
  • Cases and loose units separately: a step of 12 or 24 for full cases, a step of 1 for the rest.
  • Recount before you adjust. A difference is a question, not an answer.

Full count or cycle count?

There are two ways to approach it, and many businesses use both.

  • A full count (sometimes called a physical inventory or a stocktake) counts everything at once. It gives you a clean starting point, but it's disruptive: you usually close, or at least stop moving stock, while it happens. Most places do it a few times a year at most.
  • A cycle count counts a small part of your stock on a regular schedule, for example one shelf a day or a handful of items every week. Inbound Logistics describes it as regularly auditing small portions of inventory, so you find problems sooner and never have to stop everything.

A common way to plan cycle counts is to count the items that matter most more often: the expensive ones, the ones that sell fast, and the ones that tend to go missing. Slow, cheap items can wait for the next full count.

Get ready before you count

  • Stop stock moving in that area. Don't sell from, restock or pick from a shelf while it's being counted. If you can't close, count during a quiet hour.
  • Tidy first. Pull stray items back to where they belong, and face the shelf so you can see every unit.
  • Agree the unit. Are you counting bottles, packs of six, or cases of 24? Write it down. Unit mix-ups are one of the easiest ways to get a count wrong.
  • Count before you look. Try not to check what the system says until you've counted. Knowing you "should" have 40 makes it very easy to find 40.

Set up your counters

One counter per item, or per location

The cleanest setup is one counter for each item you're counting today, named the way it appears on your stock list: "Oat milk 1 L", "Paper cups 12 oz". Count every unit of that item, tap once per unit, then move on to the next counter.

If the same item lives in more than one place, such as on the shop floor and in the back room, give it one counter per location: "Oat milk: shelf", "Oat milk: back room". Add them up at the end. It takes a few seconds longer, but when the total is wrong you'll know which place to look at again.

Full cases and loose units

Tapping once per can is fine for a dozen cans. It isn't fine for 30 sealed cases. Split each item into two counters:

  • Full cases, with each tap adding the case size. A case of 24 cans means one tap adds 24.
  • Loose units, with each tap adding 1, for opened cases and single items on the shelf.

The item's total is the two counters added together. Only count a case as full if it's sealed. An opened case goes on the loose count, unit by unit, even if it looks full.

A woman checking shelves with a tablet
Photo: Cova Software on Unsplash

Double-check before you change the books

When your count doesn't match the record, don't adjust straight away. Shopify's advice is to recount discrepancies before adjusting records, and it's good advice: a quick second count often turns up a simple slip.

  1. Recount the item, ideally with a different person, without telling them the first number.
  2. Check the obvious places: the back room, the display, a delivery that hasn't been put away, an order that's packed but not shipped.
  3. Look for a unit mix-up, like a case counted as one unit, or the other way round.
  4. Only then update the record, and note the reason if you know it: damaged, expired, miscounted last time.

Common mistakes

  • Counting while customers are buying. The shelf changes under you and the number is wrong before you write it down.
  • Mixing units. Cases, packs and singles on one tally.
  • Forgetting second locations. The overflow shelf, the cold room, the box under the counter.
  • Counting the same stock twice because it was moved mid-count from the back room to the floor.
  • Fixing the record without a recount. You may be "correcting" a number that was right.

Tips for counting stock faster

  • Work in a fixed order: top shelf to bottom, left to right, so you never wonder whether you've done a row.
  • Touch what you count. Sliding each item forward as you tap stops you counting the same one twice.
  • Count small loose items in fives. Group five by hand, then tap once on a counter that adds 5, and put any leftovers on the counter that adds 1.
  • Do the hard shelves first, while you're fresh.
  • Keep a paper backup for big counts. Tally marks in groups of five are quick to make and easy to add up. See how tally marks work.

Count it with Plusmark

Plusmark turns your iPhone into a stack of clickers, one per item:

  • A + key on every row. In the counter list, each counter has its own key, so you can work through several items without opening any of them. Search appears once you have 9 or more counters.
  • Steps for cases. In Edit Counter, Each tap adds can be 1, 2, 5, 10 or a custom number up to 1,000,000, so a case of 12 or 24 is one tap.
  • Mistakes are easy to fix. Subtract 1 and Undo sit above the pad, and Set Count lets you type the right number after a recount.
  • Every tap is timed. History shows when each count happened, which helps when you need to know whether a delivery arrived before or after the count.
  • Six on the Home Screen. The large Counters widget puts six counters side by side, each with its own key.

There's no file export or spreadsheet sync. Share Count and History's Share send the numbers as text, which you can paste into your stock sheet or send to whoever updates the records. Counters can't be shared between different Apple Accounts, so if two people count, each keeps their own counters and you compare the numbers, which is exactly what a recount needs anyway.

The same one-counter-per-kind setup is how birders use Plusmark in the field: see the tally counter guide, or browse more ideas.

Count it with Plusmark

Plusmark is the tally counter for iPhone, iPad, iPhone Duo and Apple Watch. Name a counter, tap the big + pad, and every tap is saved with its time, with goals, widgets and Siri.